CE Certification

Models covered by this information: Glory Jacket, Glory 2.0 Jacket, Wild & Free Jacket, Savannah Shirt (Black & Denim colours), Belle Noir Pants, Delta Hoodie in accordance with the requirements of the EC Personal Protective Equipment Regulation 2016/425. These jackets  are  an  item  of  Motorcyclists'  Personal  Protective  Equipment  (PPE). 

These products conforms to the technical specification “EN 17092 3: 2020 – Protective garments for motorcycle riders” which has been deemed to satisfy the Basic Health and Safety requirements of the PPE Regulation 2016/425.

  • EU type examination has been conducted and certification issued by SATRA Technology Europe Ltd, Bracetown Business Park Clonee, D15 YN2P, Ireland (Notified body 2777) for styles Glory Jacket, Glory 2.0 Jacket, Wild & Free Jacket.
  • EU type examination has been conducted and certification issued by Intertek for styles Savannah Shirt (Black & Denim colours), Belle Noir Pants, Delta Hoodie.

 

Performance levels defined in EN 17092-1:2020 Provisional European Standard EN 17092-1:2020 defines five classifications of motorcyclists' clothing these are:  

  • EN 17092-2:2020— Class AAA garments.  The  highest  level  of  protection, against  the  highest  level  of    Some common examples are:  one-piece or two-piece suits. These garments are likely to have severe and limiting ergonomic, weight and thermal penalties, which some riders will not find acceptable for their specific riding activities.
  • EN 17092-3:2020 — Class AA garments.  The second highest level of protection, against the risks of the greatest diversity of riding activities. Some common examples  are:  garments  designed  to  be  worn  by  themselves  or  to  be  worn  over  other    These garments are expected to have lower ergonomic and weight penalties than Class AAA garments and some riders will not find these penalties acceptable for their specific riding activities.
  • EN 17092-4:2020— Class A garments. The third highest level of protection. Some common examples are: garments, designed to be worn by them self or to be worn over other clothing by riders in extremely hot environments. Class A garments are expected to have the least ergonomic and weight penalties.
  • EN 17092-5:2020— Class B garments. This class is for specialized garments, designed to provide the equivalent abrasion protection of Class A garments but without the inclusion of impact protectors. Class B garments do not offer impact protection and it is recommended that they be worn with, at least, EN 1621-1 shoulder and elbow impact protectors, in the case of a jacket, or EN 1621-1 knee impact protectors, in the case of trousers,, in order to offer complete minimum protection. Some common examples are modular garments suitable to be combined with other garments providing impact protection
  • EN 17092-6:2020— Class C garments. This class is for specialized non-shell garments, designed  only  to  hold  one  or  more  impact  protectors  in  place,  either  as  an undergarment  or  as  an  over-garment.  Class C garments are designed to provide impact protection for areas covered by the impact protector(s) and they do not offer complete minimum impact protection.  Class C garments are designed to offer supplemental impact protection only. It is  intended that class C garments be worn in combination with Class AAA /AA/A or B to enhance the protection Class AAA /AA/A or B

Some common examples are: modular garments suitable to be combined with other garments providing impact and abrasion protection or only abrasion protection.

  • However, always remember that no item of PPE can provide full protection and care must always be taken while carrying out the risk - related activity 

The official pictogram (see examples) denotes the overall classification achieved by the garment and number and year of the standard.  

 

Construction of this product.

These garments are constructed  from  materials  which  are  abrasion,  tear  and  burst  resistant.  No substances known to be harmful to human health have been used in the construction of this garment. 

 

Protection provided by this garment.

This clothing is designed to combat the hazards encountered during normal riding on a motorcycle and when the rider is involved in a road traffic accident. The clothing is designed and constructed so that it should remain in place on the wearer, and reasonably intact on impact with the road surface;

thus it should usually  prevent  any  skin  contact  with  the  road  and  therefore  minimise  mechanical impact  injuries  to  the  rider.  This clothing cannot provide protection from more serious injuries, although it may assist in reducing the severity of some such injuries.

Hazards against which some protection is provided

  • Reduction in the severity of contusions and fractures, with the prevention of some fractures and joint damage. 
  • Prevention of most laceration and abrasion injuries that occur when a rider slides on the road surface after falling off.
  • Reduction in the severity (or prevention) of muscle stripping and degloving injuries.
  • Likely prevention of contamination of open fractures by road dirt.
     

Hazards against which this garment cannot provide protection.

  • Massive penetrating injuries on parts of the body. 
  • High energy impacts on the chest or abdomen, and severe bending forces such as when the torso impacts may be against soft or hard ground, or objects such as trees, vehicles, posts or rails
  • Severe bending,  crushing  and  torsional  forces  which  occur  if the  leg  becomes  trapped between the motorcycle and another vehicles. 
  • Strikes against stationary objects.

Whilst certain types and levels of accident protection can be provided by clothing, protection against all hazards is impossible.

 

Note: The degree of risk or hazard that a motorcyclist will face is closely linked to the type of riding and the nature of the accident.  Riders are cautioned to carefully choose motorcyclists’ protective garments that match their riding activity and risks. Other garments or garment combinations certified according to the series of standards EN  17092 Parts 1 – 6:2020 may provide more appropriate protection than this garment but there may be weight or ergonomic (e.g. range of motion restrictions) or heat stress penalties associated with their use, that may be unacceptable for some riders. So far as possible, design and construction to prevent road impact injury takes precedence over other requirements, unless this would, in itself, lead to an increased risk of an accident.

 

Using this garment for the first time.

In order to benefit fully from the protection offered by these garments, you should ensure that it fits according to the following criteria:

  • The main zip closure is securely done up. The garment is close fitting as a greater amount of garment movement may expose skin to abrasion in an accident. If it is not possible to obtain a secure fit, an alternative jacket size may be required.
  • That no discomfort is caused by the jackets when in the normal, usual riding position adopted by the wearer, and that you are able to easily reach and operate the controls of your motorcycle. (Please note, however, that you should allow at least 10 hours of regular wear for the jeans to "break in"  and  become  fully  comfortable,  and  this  should  be  taken  into  account  when  first assessing the fit of your motorcyclists' PPE.)
  • There should  not  be  additional,  excessive  surplus  of  material  -  the  garment  fitting  snugly  yet comfortably  over  the  clothing  normally  chosen  for  wear  under  motorcycling    This would normally be one or two thin, insulating or perspiration-wicking layers as required.

  

IMPACT PROTECTORS

Glory jacket and Wild & Free Jacket are fitted with WINNER Lvl 1 shoulder and elbow impact protectors and SMOOTHWAYS Lvl 1 back protector. Glory 2.0 jacket is fitted with D30 Ghost Lvl 1 impact protectors.

 

Glory Jacket Protectors: 

Protectors

Name /code

Fitted Back Protectors

SW- Part 032

Fitted Shoulder Protectors

Part 790

Fitted Elbow protectors                           

Part 791

 

Wild & Free Jacket Protectors:

Protectors

Name /code

Fitted Back Protectors

SW- Part 032

Fitted Shoulder Protectors

Part 790

Fitted Elbow protectors                           

Part 791

 

Glory 2.0 Jacket

Protectors

Name /code

Fitted Back Protectors

Viper Stealth

Fitted Shoulder Protectors

Ghost S/H

Fitted Elbow protectors                           

Ghost E/K

 

Delta Hoodie Protectors:

Protectors

Name /code

Fitted Back Protectors

SW- Part 032

Fitted Shoulder Protectors

Part 790

Fitted Elbow protectors                           

Part 791

 

Savannah Shirt Protectors:

Protectors

Name /code

Fitted Back Protectors

SW- Part 032

Fitted Shoulder Protectors

Part 790

Fitted Elbow protectors                           

Part 791

 

Impact protectors should be sited over the areas they are designed to protect, as follows: 

  • BACK: Back protectors should be placed symmetrically in the centre of the back. When positioned correctly the wider coverage which covers the centre of the back and runs in the direction of the length of the back 
  • SHOULDER: symmetrically on the shoulder bone.  Ensure the pad is high enough to cover the top of the Shoulder bone. Insert into the lining pocket with the convex face outwards and secure the fastening.
  • ELBOW: symmetrically placed on the Elbow to the outside of the arm, Insert into the lining pocket and use the Velcro fastening to secure the protector in the most comfortable position when riding the motorcycle.
  • Please refer  also  to  the  instructions  for  use  supplied  by  the  impact  protector    Only impact protectors conforming to the requirements of EN 1621-1:2012  or/ and EN 1621-2:2014 should be used. Note: impact protectors must be removed when the garment is cleaned, to prevent damage to the impact foam’s structure.

  

CLEANING AND MAINTENANCE INFORMATION  

Note:  Always remove fitted impact protectors before cleaning and refit, following the instructions provided above, after the garment has been allowed to dry.

Washing garments:

Leather – Gentle spot clean only with damp cloth. Allow to dry flat.

Textile – Gentle spot clean only with damp cloth. Allow to dry flat.

 

Maintenance & servicing:
You should always check your garment and inspect protectors before you use them. Do not wear worn out or previously damaged garments. We suggest you to replace them. Do not use any modified garments or any modified garments with modified stitching.  In case of any doubts, please contact Black Arrow.​​​​​​​

 

USE WITH ADDITIONAL PERSONAL PROTECTIVE EQUIPMENT

To  achieve  the  maximum  available  levels  of  protection  in  the  event  of  an  accident,  this  garment should be used in conjunction with compatible, correctly fitting items of PPE which give coverage to areas of the body  not protected by this garment alone  - i.e.: a total PPE package should be used, comprising helmet, gloves, boots; and jacket & pants.

 This garment is designed to be worn with the following, additional PPE:

  • Motorcycle safety helmet, with fitted or separate eye protection (relevant standards include: DOT, ECE 22.05 and Snell M2000).
  • Jacket or trouser made from leather or other materials with equivalent properties (relevant standards include EN 17092 Parts 1 – 6 :2020, the French Protocol and EN 13595). It is advised that separate jackets and trousers should have sufficient overlap, when the wearer is in the riding position.
  • Gloves made of leather or material with equivalent properties, worn inside or outside the cuff of the garment and extending from the wrist joint up the wearer's arms for a distance of not less than 50mm (relevant standard: EN 13594).
  • boots: to EN 13634 made of leather or material with equivalent properties, worn inside or outside garment providing protection to the lower limbs and feet.

 

USE IN ADVERSE CLIMATIC CONDITIONS

In conditions of cold and/or wet weather, it is advised that this garment be worn with the following items:

  • A thin under garment of insulating material affording protection from cold weather for the wearer;
  • For conspicuity in conditions of reduced visibility, where high visibility materials and components are not an integral part of the garment; additional high-visibility clothing or accessories (relevant standards include: EN ISO 20471, EN1150, EN 13356).

 

IMPORTANT NOTICES  

  • This item of motorcyclists’ PPE will only provide the maximum available levels of protection when the recommended standard fitment impact protectors (see “IMPACT PROTECTORS”) are fitted and positioned in accordance with the instructions provided.  The garments must not be worn when riding a motorcycle without the impact protectors fitted. If replacing the impact protectors fitted to your garment, only use the same models of WINNER or D30 protectors which are fitted as standard. 
  • The main closures and restraint mechanisms of this garment should always be securely fastened when in use whilst riding a motorcycle or this garment's ability to provide protection in the event of an accident may be severely reduced. Never ride with main closures open during hot weather.
  • If the environmental conditions render this garment excessively and distractingly uncomfortable, a more appropriate protective garment should be worn whilst riding, or other methods of reducing the effects of heat stress employed. Further advice can be obtained from the manufacturer or supplier.
  • It is advised that solid objects should not be stored in the pockets of this garment whilst the user is riding a motorcycle, as in the event of an accident such objects may cause injury 
  • The manufacturer shall be absolved of all liability arising from injury, howsoever caused, where the garment or its components have been modified, replaced or removed.